+46 708 44 23 82

Tridon:s slangklämmor med snäckskruv

En av de mest välkända klämmorna är slangklämman med snäckskruv. Tridon:s slangklämmor med snäckskruv är bland de starkaste som finns och ger en hög säkerhetsnivå för din sammanfogning när den monteras av ett proffs som du. Våra slangklämmor med snäckskruv finns tillgängliga i flera olika material och storlekar.

Materiella normer      Rubber properties

ST This is the clamp where the Tridon story started: the combination of high-quality materials, the compact screw construction, with a house made of 1 piece together with the improved tensile strength of the band ensure a strong and worry-free seal.

"ST" Tridon Authentic

Hämta datablad Visa alla
D A worm gear hose clamp with a closed full band according to DIN with a band width of 9 mm. By anchoring the band to the clamp house, this clamp ensures a fast seal while there is no loss of torque capabilities.

"D" Universal 9 DIN

Hämta datablad Visa alla
DD This is the wider variant of the D clamp. A worm gear hose clamp with a closed full band according to DIN with a band width of 12 mm. By anchoring the band to the clamp house, this clamp ensures a fast seal while there is no loss of torque capabilities.

"DD" Universal 12 DIN

Hämta datablad Visa alla
G A worm gear clamp with a closed full band according to the DIN construction with SS2298 sizes. By anchoring the band to the clamp house, this clamp ensures a fast seal while there is no loss of torque capabilities.

"G" General purpose SS304

Hämta datablad Visa alla
HD This High Density worm gear hose clamp is equipped with 2-piece housing. The extended throughput of the band through the housing ensures maximum grip of the screw in the perforated band, so that much higher tightening torques can be guaranteed.

"HD" High Density SS304

Hämta datablad Visa alla
HDCT This is a heavy-duty worm gear clamp that is extremely suitable for conditions where temperature fluctuations occur. The 'Constant Tension' spring construction ensures that tension remains on the clamp, even if the hose shrinks or expands.

"HDCT" High Density Constant Tension SS304

Hämta datablad Visa alla
EF A quick release clamp that is ideal for attaching or sealing flexible and rigid ventilation channels. The extra safety lock on this duct clamp, ensures that the top of the clamp house can no longer open after assembly.

"EF" Easy Fit duct clamp

Hämta datablad Visa alla
GS The GS is a stretched clamp, which is often used in the manufacture of larger clamping bands, for example for exhaust gas ducts. The functionality is identical to that of the regular worm gear hose clamps. The axial constructional force is resistant to at least 3000N.

"GS" Stretched

Hämta datablad Visa alla
EB With this endless band clamp you can create the size you need. The clamp is ideal for service and maintenance work and achieves the same torque as the regular clamps.

"EB" Endless band - Create the size you need

Hämta datablad Visa alla
B Worm gear hose clamp that, thanks to its robust design, can handle considerably higher forces than the regular worm gear hose clamps.

"B" Big & Sturdy

Hämta datablad Visa alla
BA8 A worm gear clamp according to French standard with perforated band of 8 mm wide. The flexible band fits flawlessly to the hose and can provide good sealing with little force. Suitable for lighter industrial applications.

"BA" Bande Ajourée French standard 8mm

Hämta datablad Visa alla
BA14 A worm gear clamp according to the French standard, with a useful feature: the band can be placed around the hose and then hooked into the house. Suitable for medium industrial applications.

"BA" Bande Ajourée French standard 14mm

Hämta datablad Visa alla
M5 A light worm screw hose clamp with band width 5 mm. This lightweight clamp is ideal when there is a lack of space.

"M5" Universal Mini 5

Hämta datablad Visa alla
USA8 The U-Seal 8 hose clamp is a SAE Type M with closed band. Anchoring the house to the full band results in higher torques than usual for this type of hose clamp. U-Seal 8 is usually applied in smaller hose assemblies like fuel hoses, laboratory hoses or small vacuum or duct hoses.

"USA8" U-SEAL8 SAE M SERIES

Hämta datablad Visa alla
USA12F3 The U-Seal 12 F-3 is a 3-part construction SAE Type F hose clamp. This clamp is a general purpose hose clamp and can be used for household, automotive and light to medium industrial applications.

"USA12F3" U-SEAL12 SAE F-3 Series

Hämta datablad Visa alla
USA12F4 The U-Seal 12 F-4 is a 4-part construction SAE Type F hose clamp. This clamp is a general purpose hose clamp and can be used for household, automotive and light to medium industrial applications.

"USA12F4" U-SEAL12 SAE F-4 Series

Hämta datablad Visa alla
MD-USA The Medium Density is a 4-part construction SAE Type F hose clamp. This hose clamp is a 20% heavier duty general purpose hose clamp and can be used for household, automotive and medium to heavy industrial applications.

"MD" Medium Density SAE F Series

Hämta datablad Visa alla
HD-USA The High Density is a 4-part construction SAE Type HD hose clamp. The extended throughput of the band through the housing ensures maximum grip of the screw in the perforated band, so that much higher tightening torques can be guaranteed. This hose clamp can be used in heavier industrial applications such as industrial mobile machinery, heavy (off-road) trucks, agricultural equipment etc.

"HD" High Density SAE HD Series

Hämta datablad Visa alla
HDL-USA The High Density with Liner is a 4-part construction SAE Type HD hose clamp with an inner liner to protect (softer) hoses. The extended throughput of the band through the housing ensures maximum grip of the screw in the perforated band, so that much higher tightening torques can be guaranteed. This hose clamp can be used in heavier industrial applications such as industrial mobile machinery, heavy (off-road) trucks, agricultural equipment etc.

"HDL" High Density with Liner SAE HD Series

Hämta datablad Visa alla
MDCT-USA The Medium Density Constant Tension is a 4-part construction SAE Type F hose clamp with Belleville springs. The hose clamp with spring construction , is engineered to create constant tension of the seal in case of fluctuating temperature applications, such as cooling installations. These hose clamps have a standard inner liner to protect the softening rubber due to temperature increase.

"MDCT" Medium Density Constant Tension SAE SLF Series

Hämta datablad Visa alla
HDCT-USA The High Density Constant Tension is a 4-part construction SAE Type HD hose clamp with Belleville springs. The hose clamp with spring construction , is engineered to create constant tension of the seal in case of fluctuating temperature applications, such as cooling installations. These hose clamps have a standard inner liner to protect the softening rubber due to temperature increase.

"HDCT" High Density Constant Tension SAE SLHD Series

Hämta datablad Visa alla
PC A protective cap for worm gear hose clamps with 12 mm bandwidth. The red HDPE plastic stands out in regular industrial environments.

"PC" Protect

Hämta datablad Visa alla
ASSORT Assortment boxes with different sizes of hose clamps.

Assortments

Hämta datablad Visa alla
TOOLS A handy pair of pliers to attach spring band clips from Dn13 to Dn50.

Tools

Visa alla

Skräddarsydd paketering

Optimera ditt arbetsflöde genom att få din beställning förpackad på det sätt som passar dig bäst! Med vår skräddarsydda paketeringstjänst behöver du inte packa om klämmorna när de levereras till dig, vilket minskar onödig arbetskraft och slöseri. Läs mer om vår skräddarsydda paketeringstjänst här.

Be om varuprover

Funderar du på att köpa slangklämmor med snäckskruv från MPC, men är inte säker på om klämmorna passar dig perfekt? Kontakta oss för att beställa varuprover av produkterna du föredrar, så att du kan uppleva kvaliteten hos Tridon:s slangklämmor med snäckskruv innan du beställer större mängder.

Be om varuprover

Choose your language